Page 61 - Barton Brochure
P. 61
Reefing kits &?hooks 1 41517 5 41496 Sail Handling
2 41518 4 41483
REEFINGSingle line reefing kit
3 41130
A boxed complete single-line reefing kit that allows reefing
lines to be led aft to the safety of the cockpit.
KITS &This system makes reefing your mainsail a quick and easy
operation - just lower the main to a predetermined mark
HOOKSon the halyard, tension the reefing line and re-trim the sail.
Supplied as a complete set with all the parts and fixings
required, together with full fitting instructions. All you need
to provide is a line and a cleat or stopper.
Slab reefing kits
Supplied with sliding blocks which are held in place with
spring-loaded plungers. Manufactured from stainless steel
and ‘Spectro’ anodised aluminium. Available in two sizes
and complete with sufficient length of ‘T’ track and
end stops.
Specifications
41483 supplied with 60cm of 25mm
anodised ‘T’ track
41496 supplied with 100cm of 32mm
anodised ‘T’ track
No. Part number (see page 6 for
setup options)
Single line reefing kit 41130
3 For yachts up to 9m (30ft)
41483
Slab reefing kits 41484
4 For yachts up to 8.5m (28ft) 41496
Spare slider for above 41497
5 For yachts up to 12m (40ft)
Spare slider for above
Stanchion lead blocks 10 60142
Mainly used for leading headsail furling lines aft, Barton stanchion 6 02190
blocks are available in three sizes to suit most applications. 8 03190
Double blocks are designed for use with endless line systems and
can easily be taken apart to accept pre-spliced lines.
A larger size 4 block should be used for final take off, especially if the
furling line is to be lead to a winch.
All stanchion blocks are available with either plain or
ball-bearing sheave.
Reefing/gooseneck hooks
Manufactured in stainless steel, both these types of hook are used
in conjunction with slab reefing kits for securing the mainsail tack.
Type 41517 is supplied in pairs and is intended for mounting either
side of the boom at gooseneck level.
Type 41518 can be mounted above the gooseneck or can be
used at the stemhead to accept a jib tack.
No. Part number 9 04190
Reefing hooks
41517
1 Boom fitting (pair) 41518
2 Gooseneck or stemhead fitting
No. Description: Part number Sheave Ø (mm) Max line Ø (mm) Max tube Ø
(mm)
Stanchion lead blocks
6 Single stanchion - size 2 Plain sheave Ball bearing sheave
7 Double stanchion - size 2
8 Single stanchion - size 3 02190 12190 35 8 25 7 02290
9 Single stanchion - size 4 02290 12290 30 10 25
03190 13190 45 10 25
Stanchion bullseye 04190 14190 58 12 25
10 Stanchion bullseye
60142 Bullseye internal diameter 17mm
61Barton Marine | control the power | www.bartonmarine.com |